![EL-133 Cone 06](https://www.columbusclay.com/wp-content/uploads/2015/03/el-133-150x150.jpg)
EL-133 Autumn
March 25, 2015![EL-135 Cone 06](https://www.columbusclay.com/wp-content/uploads/2015/03/el-135-150x150.jpg)
EL-135 Rare Earth
March 25, 2015EL-134 Mirror Blue
$16.95
Mayco Elements Cone 06 (Non Toxic)
Cone 06 oxidation (first photo): Mirror Blue is a glossy, vibrant blue glaze. Semi-Transparent at three coats.
Cone 6 oxidation (second photo): Color darkens. Enhanced mobility. Surface issues may occur.
TIP: This glaze WILL move. Take care when using on vertical pieces reduce glaze thickness towards the bottom third to minimize run-off. Not overglaze compatible.
Designed to simulate the aesthetic, movement and interest of mid-range and high fire glazes in a cone 06/05 oxidation kiln firing, Elements™ and Elements™ Chunkies give artists a wide variety of options in one product, as glaze application, firing temperature and shape will influence the outcome of finished work. Elements™ are a two-tone glaze with a main color and a secondary color called a float. When Elements™ are applied to detail pieces, the float color will appear in the crevices. Application and firing will also affect the outcome of main color or float.
General Use
Shake for five to six seconds before use. Dispense glaze onto a palette (tile, plate, etc.) and apply with a soft brush or decorating accessory of choice (sponge, stamp, etc.). Dipping your brush directly into the jar may contaminate the jar’s contents, especially if you are using other glazes. Apply three to four coats to your piece. Elements™ glazes were designed to mature at a shelf cone 06 (999° C or 1830º F). When applying them over a large surface area, we recommend a broad, soft fan brush.
Moisten the brush with water first. The brush fully saturated (loaded) and each coat applied in the same direction. When the wet look has gone from the first coat, you may apply the next coat of glaze. Be sure the glaze has dried thoroughly prior to firing. A medium ramp/firing rate is recommended (250°F per hour) at shelf cone 06. Elements™ can be fired at higher temperatures but will change in appearance. We recommend testing prior to use.
Weight | N/A |
---|---|
Quantity | 1 pint |